Posts

Showing posts with the label Wood Deck Coating

Decktek Coating expains Fall deck maintenance in Prescott

Image
As we transition into Fall, you might be thinking that now is a great time to prepare that old deck of yours for the harsh winter cold. Snow sitting on top of it for days at a time could really damage the wood and lead to rot or instability. Decktek Coating, deck restoration and refinishing in Prescott, suggests that if you haven't cleaned, maintained, or refinished your deck recently, it might be time. Some general maintenance you can do to help your deck survive the cold months (and even prep for a refinishing, if needed) is to thoroughly sweep the deck and give it a good rinsing. Make sure to remove any debris stuffed in the gaps between the boards. If you find yourself sweeping up “peelings”, you might be due for a deck refinishing. Now would also be a good time to tighten any screws that have popped up or become loose, and to re-secure any wobbling railing or boards. Make sure to occasionally move anything sitting on the deck to avoid discoloring. Trim any nearby bushes to av...

Fall Deck Maintenance in Prescott - Decktek Coating

Image
You have enjoyed your deck in Prescott all summer. There have been some serious gully washers this monsoon season, which have caused a lot of extra leaves, pinecones and pine needles to build up in the nooks and crannies. It’s easy to sweep all of that away, but the deck can still look super grimy. Decktek Coating has a few clean up suggestions, before fall gets here, for deck care in Prescott. Some of that extra grime on your deck can be caused by living organisms. Just like the algae and moss that grow on rocks and in streams, the extra moisture on your deck can promote the growth of organic material. It can be a hazard making the wood slippery while it’s wet. The best way to lift this grime is with a power washer. Pay close attention to the cracks between the deck boards and the area up against the house. These are the areas where mold and fungus are more likely to grow. Keep your distance while using the power sprayer. Avoid applying too much pressure which can cause gouges ...

How Often Do I Need to Refinish My Deck Using Traditional Methods? - Decktek Coating in Prescott

Image
Many homes in Prescott have beautifully designed decks. A deck adds value to a home and as such, is a big investment. Every home owner understands the necessity of protecting that investment with a quality product that will last. When it comes to traditional methods of staining a deck we have found that it has to be taken care of every two years. Decktek Coating understands what happens to the surface of a deck when traditional methods are used. The ever changing weather conditions cause natural wear on deck surfaces. Pressure-treated pine, tropical hardwoods, cedar, and even redwood need extra protection after a few years. Moisture from rain, snow and humidity will cause problems like raised grain, and splitting. Each time a deck is treated with the traditional methods, it becomes necessary to power wash, strip and sand the surface. All of these are an added expense to the homeowner. What every deck needs is a long lasting finish that will penetrate the wood’s surface to slow down...

Deck Restoration in Prescott: Some Good Advice - Decktek Coating

Image
It's that time of year in Prescott when we can enjoy the beauty of the outdoors from our deck. Right now, the best time is in the evening when we can watch a few thunderstorms roll in. What better way to enjoy those evenings is there, when we can relax on a deck that is well cared for . Decktek Coating in Prescott has a complete list of how to do it, and how to do it right 5 STEPS TO RESTORING YOUR DECK BEFORE STARTING Always hose down your deck first, before applying cleaners or strippers to the surface. The water acts as a barrier to prevent any of these chemicals from penetrating too deeply into the wood. It's only the surface you are cleaning. Product residue like bleach can and will shorten the life of your deck. APPLY CLEANERS Using high concentrations of chlorine bleach (sodium hydroxide) is not the best method of cleaning your deck. Yes it will kill mold and mildew and brighten the wood, but at the expense of damaging the fibers of the wood. Chlorine blea...

More Than a Deck Staining Service in Prescott: An Informative Article from DeckTek Coating

Image
If you’ve lived here long enough, you may have found that your deck in Prescott is already in dire need of restoration, repair, or it might need a new finish applied to it. Arizona goes through several dramatic climate changes throughout the year. No one understands Prescott’s sometimes harsh climate more than DeckTek Coating in Prescott. Here, they explain more about their service and the unique product they offer.DeckTek Coating has over a decade of experience for the care and maintenance of exterior stained wood surfaces. They have perfected their skills and knowledge on the appropriate products for the job. They specialize in all phases of the wood refinishing process, including: Paint Removal, Sanding, Power Washing, Staining and Maintenance. Wood Refinishing Services: The prime focus is on deck refinishing in the Prescott Area. They also offer a variety of wood restoration services. They specialize in wood care for your log homes, wood siding, fences, and any other outdoor w...

To Coat, or Not to Re-Coat. Decktek Deck Restoration in Prescott has the Answer with a few Simple Steps

Image
Is it Time to Re-Coat my Deck ? Decktek Coating in Prescott has a few tips to find out if your deck is ready for new deck coating.  It’s already summer, but there is still time to be sure that your deck is ready for guests and your family to enjoy your deck with you. We have broken the steps into two separate categories, Water-based products and Oil-based products. Water-Based Products Here is quick and easy test to determine if spending the time and money to re-coat your deck is worthwhile: Use a 6 inch length of duct tape and apply it to the surface of your deck. Remove the tape to see if the finish peels off with the tape. If it does, then reapplying over the surface’s existing product is not worthwhile. Reapplying ANY new coating product is not going to bond to the surface of the deck when the old finish is no longer bonding to the wood. Your only option is to strip the surface of the existing coating down to the bare wood, and then reapply the new coating. On the othe...