Decktek Coating - Deck Restoration in Prescott

Do you remember the days of family barbecues out back on the deck when you were young? Ah, the smell of the charcoal, and the taste of the burgers, running barefoot across the boards. Have you thought of building one for your family, or maybe you are fixing up the old deck from your past? Have you considered if you are going to stain or paint it? Decktek Coating, your local deck restoration company in Prescott, would like to help you decide. Are you going to use paint or stain? When building s new deck, or sanding down the old surface and starting over, you should apply some kind of finish to protect your investment. The finish you use will determine the time between maintenance needed to keep it looking beautiful. Both paint and stain can give you a deck that lasts years longer than it would if left untreated. These finishes make the wood less water absorbent, causing the wood to stay dry on the inside. These products also help protect against damage from the sun. Here we share

Protecting our decks and railings from the elements is important, but too often we overlook items like vegas and beams. These are important structural supports for our homes. We not only want them to look architecturally pleasing but also protect them from the elements as well. Decktek Coating, a local service provider of wood and deck restoration in Prescott , offers the following about sealing vegas and beams from water intrusion and potential wood rot. The bottom mounting location for vegas and beams is often overlooked. Sealing up the gap between the vega and the mortar is important in the prevention of wood rot. Another area that is often overlooked is the cracks and splits that occur at the bottom of the mounting location as well. These open cracks allow water in around the base of the vega, overtime deteriorating the wood. BEST PRACTICE FOR SEALING There is a right and wrong way for sealing these cracks. The wrong way is to think you can simply take a caulking gun and fi

A deck repair in Prescott begins with an exciting trip to the home improvement store. Your list of items will include extra long deck screws, boards, wood cleaning products, stain, a brush, and of course, new fresh lumber. There’s no guesswork when it comes to doing quality work on your deck and Decktek has some ideas to prepare yourself before you head out to load up the truck with your deck restoration supplies. Before you begin, take another look at each board. Badly split or rotten boards are worth replacing. They’re noticeable at first glance, but are the joists (support members) in better condition, the same, or worse? It’s a good idea to double check to be sure that there is enough strength to support the new boards now and in the future. It’s okay to have a little age show on the joists, but make sure that there isn’t too much decay causing them to be spongy. If there is too much decay, or rot, then the boards are not sturdy enough to support the new replacement boards.

When restoring a deck in Prescott, it’s just as important to prepare the railings for refinishing . If the railings were painted, are they flaking or peeling? We recommend a thorough stripping before completing any of the railing’s restoration. At Decktek Coating, we believe that a restored deck without restored railings is the same thing as putting good over bad. There are different ways to remove the old finish.  It can be done through the use of chemical strippers, power washers or sanding. It’s possible that any combination of the three could be used. However, if there are multiple coats of product, then stripers will help speed things up. One coat of an existing product may only require a thorough sanding. Here are some tips on how to sand and strip the railings of our home’s beautiful deck. Sometimes railings have balusters that are constructed closely together. To sand between them would make the job impossible to complete.  It’s easier to disassemble the railings, separating

A wood fence in Prescott adds beauty, value and privacy to a home. It safely keeps children in the yard and stray animals out. When a new fence is built with newly constructed homes, they are made of cedar or redwood. They are more resistant to rot and decay than other species. They're not structurally as strong as Douglas fir, which is used in framing a house, but for anything that is exposed to outdoor weather, cedar and redwood are the two species of wood used. Decktek Coating offers exterior wood care services in Prescott for those times when the fence has been neglected. There are a few things you can do yourself to protect a wooden fence. When buying wood for fences, look for pressure-treated wood for posts. Posts should be pressure-treated because they go into the ground, where they are susceptible to insects and moisture. They are chemically treated to resist bugs and water damage. Pickets don’t need to be pressure treated, but within the first year, the wood may wa

You have enjoyed your deck in Prescott all summer. There have been some serious gully washers this monsoon season, which have caused a lot of extra leaves, pinecones and pine needles to build up in the nooks and crannies. It’s easy to sweep all of that away, but the deck can still look super grimy. Decktek Coating has a few clean up suggestions, before fall gets here, for deck care in Prescott. Some of that extra grime on your deck can be caused by living organisms. Just like the algae and moss that grow on rocks and in streams, the extra moisture on your deck can promote the growth of organic material. It can be a hazard making the wood slippery while it’s wet. The best way to lift this grime is with a power washer. Pay close attention to the cracks between the deck boards and the area up against the house. These are the areas where mold and fungus are more likely to grow. Keep your distance while using the power sprayer. Avoid applying too much pressure which can cause gouges